|
|
1.We are manufacturer of power supply for 12years
2.We can customized different voltage of output 12v 24v 13.5v 27v 36v 48v 60v 70v 110v
3.Universal AC input/Full range(up to 264VAC)
4.plastic housing waterproof
5.Withstand 1.5KV surge input for 50 seconds
6.Low cost , high realibility
7.Inner security for using
8.Standardized procedure for testing through all production process
INPUT MODEL LPV-60-5E LPV-60-12E LPV-60-15E LPV-60-24E LPV-60-36E LPV-60-48E
DC VOLTAGE 5V 12V 15V 24V 36V 48V
RATED CURRENT 8A 5A 4A 2.5A 1.67A 1.25A
CURRENT RANGE 0 ~ 8A 0 ~ 5A 0 ~ 4A 0 ~ 2.5A 0 ~ 1.67A 0 ~ 1.25A
RATED POWER 40W 60W 60W 60W 60W 60W
RIPPLE & NOISE (max.) 80mVp-p 120mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-p
VOLTAGE TOLERANCE ±8.0% ±5.0%
LINE REGULATION ±1.0%
LOAD REGULATION ±6.0% ±2.0%
SETUP, RISE TIME 500ms,20ms/230VAC 500ms,20ms/115VAC at full load(for 5-36V);500ms,30ms/230VAC 500ms,30ms/115VAC at full load (for 48V)
HOLD UP TIME (Typ.) 50ms/230VAC 16ms/115VAC at full load
INPUT VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 78% 83% 83% 86% 86% 86%
AC CURRENT (Typ.) 1.2A/115VAC 1A/230VAC
INRUSH CURRENT(Typ.) COLD START 60A(twidth=525μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
CIRCUIT BREAKER
LEAKAGE CURRENT 0.25mA / 240VAC
PROTECTION OVERLOAD 110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 41.4 ~ 48.6V 55.2 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT WORKING TEMP. -30 ~ +70°C(Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +80°C, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/°C (0 ~ 50°C)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & SAFETY STANDARDS IP67 approved; design refer to EN60950-1
WITHSTAND VOLTAGE I/P-O/P:1.5KVAC
ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25°C/ 70% RH
EMC EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3
EMC IMMUNITY Compliance to EN55024, light industry level,criteria A
OTHERS MTBF 732Khrs min. MIL-HDBK-217F (25°C)
DIMENSION 162.5*42.5*32mm (L*W*H)
PACKING 0.4Kg; 32pcs/13.8Kg/0.56CUFT
According to the type of DC output, switching power supply can be divided into three types: voltage stabilized mode, constant current mode, constant voltage adjustable mode and constant voltage constant current mode.
The output voltage of the voltage stabilizing circuit is a stable voltage, which generally has 5V, 12V, 24V, 36V and 48V. It can be adjusted in the range of (+10%) to correct the output voltage. The output current has the characteristics of changing with the load resistance. Therefore, it has great limitations to supply power to LED, battery and other devices.
wholesale Led Driver
website:http://www.wehogroup.com/led-driver/ |
|
Majalah Online