Form Login



Agenda Kegiatan Masjid

Jadwal Sholat Kota Jakarta
Beranda



Just how cool a question of interest to me as well. I low alch with the explorer ring - but thats only because its free xp - although limited to OSRS gold about 30 per day. I use the nats I get to superheat ore. Not a priority with me to get runes,its a matter of luck for me. But I know there's a list of monsters and fall stats should you want to slay for a stack of nats?

I train slayer and overlook that which critter had the very best nat drops. . I know the roaches fall nats,but unless your into battling a lot then relying on this for nat generation is mighty slow. On the other hand - the rates are very low on things now and runes are inexpensive to buy when you've got the gp to but a mighty stack. I have only played because 08 and I believe that is the cheapest I've seen prices move. In the past I offered runes,but now I am burning them up as its not a large drop of cash to use the runes I have. At this time anyway - Though things changes... And I really anticipate this latest dumb upgrade to get figured out in our world. Until then im off to knock some gold loose from the critters butt. So here is how I'm fighting them: Inventory- A sheet of emergency food. Glarial's amulet so I can go in the waterfall to fight them. Fully charged games necklace to bank every now and then at the Barbarian Outpost.

So far, it's working very good and that I only need to bank when I can't hold any further drops. You're seriously better off with a whip instead of Guthan's warfare asses. The damage per second of the spear is awful, so only re-banking when you want to is faster. Switch into a whip if you don't need to heal then. Simple to solve.

Helm: Total Slayer Helmet - While I'm not killing them for a slayer job, the Total Slayer Helm supplies excellent defence to get a ranged helm, as well as cheap RS gold provides a bonus to ranged attack, even when I do not receive the 15% incentive since it isn't a slayer job. Amulet: Armadyl Pendant - Inexpensive Armadyl item. I currently have an offer in for an Armadyl Stole to substitute it, but it likely will not buy for just a tiny bit.


Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

However, for java, it's significantly harder since bytecode is easier to modify than your classic x86 architecture.If enough resources and OSRS gold money had been put together, they could make a c++ loader, which may minimize the issue greatly. Then, they can add actual anti cheat that can actually have a larger impact than the present.


I believe riot games has done something similar to this, but to a far greater extent. They forced people to use their launcher and made sure to check if hashes do not match. When it found it doesn't, it will upgrade the game for you .


If they sent a hash of the gamepack after the game is loaded, it could detect the customer and prevent injection.However, it may be spoofed. But if done properly, it would be rather tricky to spoof, but it would need a lot of thinking so as to reduce the ability to spoof it.


It is not Jagex's job to cope with Venezuela's inner issues. If you want to help somebody that's your prerogative but foisting the duty on Cheap Runescape gold others is repugnant.No they can't, because the third party customers that don't want to be discovered will only change the code to ship the same list of JARs because the official client. They can simply lie. Jagex has no way of knowing if they're lying.


I'm not gonna get behind banning them in a bigoted fashion for apparent reasons. It is rather alarming how people think their game is over the lives of many others that aren't as fortunate.

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

FixMaddenFranchise is Mut 21 coins nothing whatsoever like what happened with BF2. Financially, lawfully, geopolitically, Disney, only on a whole different level. Yeah I mean it kinda is. Significant fan revolt. EA panicks. Disney gets involved. I mean that they listen if it gets bad . Which it clearly is. NFL isn't becoming involved with this. There is absolutely no legal exposure for EA. NFL is not concerned. Hell, the discontent was string before the renewed EA's exclusivity and it did not prevent them from giving it right back to EA. Well they've never made a public statement like this earlier. Whilst this is apparently a favorable sign, please temper anticipation and adhere to any guns you are sticking to. Current-gen discs of Madden 21 have been in or very nearly at the can. Devs will be working on crucial Day One Patch issues up until a week or 2 before release date.Madden NFL 21 Next-Gen Update information

However, for a Next gen update when compared with what 2k did for NBA2k, this is honestly very disappointing unless gameplay takes an insane step forward. But we're still missing out on a whole lot of Franchise and Superstar features we should have by now, especially on Next Gen. That is 100% a wait and see from me. Madden 21 has not revealed enough for me to buy it . Might wait for it to be free on Gamepass in the new year. You mean the default playcalling method for Madden 2001? This is not brand new; this is EA putting something back in the game which should have always been there.

Playing 2k on the PS5 recent days I am only expecting the madden games load in as quickly as 2k. It takes like 5 seconds from choosing your staff to get to tip off. It takes more time to make it through the push any button screen in madden then it takes to receive my very first bucket in a game of 2k whilst starting up the games. New Player Movement: Hopefully cool! It is based off animation along with also the shoulder pads. I believe it would make better sense to have the chips in the shoes also. Footwork is atrocious. But I guess when my rb trips over his feet or a lineman's shadow his shoulders will be square...

When does this come out on buy mut coins madden 21 game pass? Madden has normally come out to EA Access round the Super Bowl. But they haven't officially announced it . And it is possible they might not do another gen version right away. Yeah not certain how that is going to get the job done. Next gen is a free upgrade for men and women who purchased it on current gen, so acquiring current gen on gamepass would surely unlock the update? I'm not even sure if you can play the current-gen version on next-gen consoles... You definitely can. I mean once it's out. Like, not do the upgrade and still play. They have not announced it yet, which is actually the first cycle EA Play has been part of Gamepass. I'm guessing it will be sometime in Q1 2021 however that I do not know for sure. I believe Madden 20 published in January 2020 into EA Play, but I can't find proof of that anywhere.


Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

Does Gold’s Downside Bottom Out or Just Start?


Prices of gold and silver saw a large retreat four weeks ago just after I published the Negative Points of Buffetts Buying Gold-Mining Stocks. Trends of precious metals are seemingly simple but yet proved to be tricky.To get more news about WikiFX, you can visit wikifx official website.
As of this writing (September 24), spot gold prices have fallen from the all-time high of $2,075.00 to $1,853.50, a decline of 10.67%. Such a drop stems mainly from the upbeat expectations of financial markets on the available coronavirus vaccine, which pushes economic activities back on track. With the economy seeing the start of a pick-up, central banks unwind the pressure on monetary easing, thus gold prices are punished. Besides, as over ten countries have been delivering their gold reserves back from the U.S. and U.K., I suppose some countries are likely to dishoard gold for more cash amid the high gold prices, so as to ease their financial pressure in outbreak response.


The recovered U.S. dollar, of course, is the last factor depressing gold prices. Apart from the changes in the Fed‘s monetary policies, which have sent a rally to the greenback, the Fed officials also stated that the country’s interest rates would have a chance to rise early, fueling further gains for the DXY to breach above the $94 barrier. Moreover, considering the DXY outshines others at the expense of GBP and EUR, all the non-USD currencies, gold, and silver have seen varying degrees of correction.
In terms of catching gold prices, investors are recommended to eye the dollar rather than indiscriminately focusing on other topics. With the U.S. stocks remaining weak recently, the U.S. dollar has bottomed out due to the RSI divergence, which becomes another key affecting the dollars trends. The trends on the chart show that the current DXY is expected to reclaim the $95.716 level, putting correction pressures on gold prices and non-USD currencies in the short run. From my estimate, gold may challenge a lower level of $1,765.00 this time while the silver is highly like to further decrease to $19.648.

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

Fed Fund Futures See Fluctuations After Rate Meeting



The Fed maintained the current quantitative easing with the interest rate unchanged in the two-day meeting, which perfectly meets expectations. In financial markets, recent coverage of the Fed‘s last meeting in 2020 has been dominated by talk of Chair Powell’s outlook for economic and monetary policies in 2021. Besides, how Feds 17 policymakers see future rate guided by bitmaps is also on the radar.To get more news about WikiFX, you can visit wikifx official website.
Powell remained a dovish stance on monetary policies, according to his post-meeting statement. Nonetheless, he was optimistic about economic growth prospects over the next years, which is in line with expectations. Despite the surging pandemic, substantial progress has been made in the vaccine distribution and inoculation, said Powell. In this case, the US government is highly likely to sustain fiscal policies conducive to economic recovery, a possible reason for the Feds forecast change. The Fed raised its GDP projection for 2021 to 4.2%, slightly higher than the 4.0% set before. It also expected unemployment to decline to 5% in 2021, much lower than the previously expected 5.5%.
In spite of dovish monetary policies, bearish prospects for the economy and the unemployment rate have turned to be bullish. All 17 policymakers of the Fed have agreed with a rate increase ranging from 2% to 3% in 2023, among which four expect a rise up to 2.5%. Another remarkable thing is the Fed Fund futures, though ignored recently. According to CME Group‘s probabilities of possible target rates calculated by the Fed Fund futures contract prices, the chance for an unchanged interest rate in next year's January, March, April, and June is 100%, while that for a rate at 0% to 0.25% in September 2021 is 93.8%. There is a 6.2% probability that the rate will increase from 0.25% to 0.5%, showing investors’ early speculation on the Feds rate hike.
The chance of 6.2% is small but of great significance. Personally speaking, the Fed still has a good opportunity to keep the interest rate unchanged for 2021. But if the US economy in the first half of 2021 revives on vaccine rollout, financial markets could speculate on the Feds market exit in advance. The reason is that the Fed is set to change its monetary policies in the order of market exit, interest rate hike, and balance sheet unwinding. Therefore, if the speculation occurs next year, chances are the greenback is poised to bottom out. But before then, the dollar is bound to suffer from short-term weakness.

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

Natural Gas Price Fundamental Daily Forecast


Natural gas futures finished higher on Friday, underpinned by consistent liquefied natural gas (LNG) demand and a bullish government report for the week-ending December 11. Helping to generate a small spike to the upside during the session were forecasts calling for freezing temperatures.To get more news about WikiFX, you can visit wikifx official website.
On Friday, February natural gas futures settled at $2.603, up $0.033 or 1.28%.

Despite the strength in the futures market, the spot market was under pressure as traders booked profits after nearly week-long gains and squared positions ahead of the weekend. According to Natural Gas Intelligence (NGI), the Spot Gas National Average dropped 55.0 cents to $3.010. The catalyst driving the price action was the passing of a major snowstorm that hit the Northeast early in the week, but dissipated by Friday.
Short-Term Weather Outlook
Forecasters expected winter conditions to further ease over the weekend, with warmer-than-normal conditions spreading over most of the Lower 48 early in the Christmas holiday week. However, a widespread blast of cold was expected to arrive by Christmas Eve and last for several days, generating strong national heading demand, NatGasWeather said.
“A mild break is likely over much of the United States near December 28, but with the potential for cold to return December 29-January 1,” the forecaster said. That set up a potentially favorable mid-range outlook for domestic natural gas demand and supporting futures on Friday.
[fx-article-ad]LNG Feed Gas Volumes Steady
NGI said on Friday that “LNG Feed gas volumes, meanwhile, hovered near 11 Bcf as trading commenced Friday. That was on par with the prior day and reflected steady and solid demand for U.S. exports as winter weather settles across much of Asia and Europe and heating fuel needs mount.”
Delayed Reaction to slightly Bullish Government Storage Report
Natural gas prices rebounded on Friday after traders took another look at Thursdays Energy Information Administration (EIA) storage report. The initial reaction to the report was bearish with the market posting a bearish technical closing price reversal top.
However, there was no follow-through to the downside on Friday which suggests the report was perceived as bullish and that traders believe stronger seasonal heating demand is here to stay after a dismal month of November.
The EIA reported a 122 Bcf withdrawal from inventories for the week-ending December 1. This was marginally higher than the median estimates found in major polls.

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

DXY Sees Grim Prospect


Societe Generale this week discussed the USD long-term outlook and forecast a 5% fall for the Dollar Index (DXY) in 2021, with further losses to come in 2022.To get more news about WikiFX, you can visit wikifx official website.
This year's dramatic shift in Fed policy has wiped out most of the advantage, said SocGen. The bank expects the DXY to stand at 86.70 after a 5% loss as the global economy recovers from the pandemic.
Looking ahead, there are chances that the US sustains, or adjusts slightly, its ultra-low interest rates and ultra-loose monetary policies in the following period till 2021, which will weigh on the DXY.
Another hit to the DXY comes from Biden's stimulus measures after he takes office. The new stimulus package might be greater than $2 trillion by 2021.
Citibank also holds a bearish dollar view for 2021. The bank said vaccine rollout could cause the DXY to plunge over 10% next year.
Technically speaking, the DXY will continue to test the key support at 88 after breaching below the 90 mark in 2021, with the 84 level beckoning next. If nothing else, modest fluctuations will keep the DXY dipping into the 88-95 range.
All the above is provided by WikiFX, a platform world-renowned for forex information. For details, please download the WikiFX App: bit.ly/wikifxIN

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

Gold‘s 1900+ Track Looks to Be in Santa’s Sack


Gold: A year ago in this paragraph we penned: “…priced per this writing at $1,482, our valuation measure by debasement alone of the U.S. money supply (M2) is Gold $2,991. No, price shant rocket up that far in 2020…”To get more news about WikiFX, you can visit wikifx official website.

With Gold today priced at $1,890, our debasement value of Gold is $3,600: and given all the additionally COVID-induced debasement, Gold ought have a super 2021, perhaps not reaching all the way to $3,600. But should history yet again repeat, Gold eventually shall catch up to debasement value: thus price remains terrifically undervalued and shall move up into uncharted territory above the recent all-time high of $2,089 as 2021 unfolds.
The S&P 500: A year ago in this paragraph we penned of : “…the President being re-elected…but the Trade of the Year is to sell the S&P going into Election Day…”
Wrong we were. And yet the S&P is now even more excessively expensive as we‘ve ever seen it: upon Tesla (TSLA) being added to the Index, our “live” P/E stands to exceed 60x! Pardon the drama, but that is stock market suicide. Especially as at this writing, the yield on the “riskless” Bond is 1.676% vs. that on the “risk unlimited” S&P only being 1.532% Uh-ohhh… And should the S&P halve itself, ’twould still by lack of substantive earnings be expensive.
So there ‘tis. Plus, as herein penned and graphically depicted (per last week’s missive) of Gold‘s rise into year-end over recent years, ’tis thus far again playing out. Moreover, just in time for Santa‘s sleigh ride ’round the world. For as we go to Gold‘s weekly bars from a year ago-to-date, in settling out yesterday (Friday) at 1887, price is now well within range to take out the overhead descending red dots of parabolic Short trend so as to flip ’em Long in the ensuing week. (That of course barring a bunch of Short Scrooges hitting underlying bids to make it all go wrong).
But the point is: with Gold at 1887, the flip price as depicted at 1925, and our “expected weekly trading range” now at 77 points, the 38-point run up to eclipse the red dots is well within range. “Now, Dasher! Now, Dancer! And the balance of you bunch! Lets DO this!” (A little poetic license, there):
As for you dot counters scoring at home, the duration of the above red dots is now 17 weeks, ranking it fifth amongst the 42 parabolic Short trends millennium-to-date. For the other prior four of more Short duration, once they flipped to Long, the additional upside Gold points gained were +126 (after 20 Jan ‘12), +181 (after 17 Aug ’12), +35 (after 31 May ‘13) and +148 (after 07 Sep ’18). So from the “Fun With Numbers Dept.” were the current parabolic Short trend flip to Long at the noted 1925 price and the average points gain following those four other occurrences ensure, the rise would be +122 points to 2047 … sufficiently near the All-Time High of 2089 that 2100+ would be just fine. Whats in your hearth stocking?
Speaking of stock, the market of such obliviously keeps rising, the S&P 500 recording its own all-time high on Friday at 3727. That‘s carrying an obscenely high “live” price/earnings ratio of 45.8x. Oh but wait there so much more! The big four-wheel battery company Tesla (TSLA) goes into the S&P 500 on Monday, so we can update that … now hang on, let’s see … the stock is $695/share of which outstanding are 947.9 million and the trailing 12-months EPS is 57¢ which puts its P/E at 1,227.5x and by capitalization weighting twill rank fifth amongst all 505 S&P constituents with a 2.021% share of the Index … and WOW: that puts the P/E of the entire S&P up to 69.7x! Cue the late, great sportscaster Bullet Bill King: “Holy Toledo!” (Stock market suicide, indeed).
Further, taking stock of the Economic Barometer finds it in full plunge of late, And let‘s face it, ’tis hard to maintain the torrid pace of the Baro‘s recovery in climbing out from COVID. ’Course the stock market per the red line of the S&P 500 could care less about the economy, just as it does not about earnings. (But let‘s not through cold water upon Santa’s annual rally, lest his sleigh rudders freeze). Nonetheless, incoming Baro metrics this past week found lower levels for December in each of the New York Empire State, Philly Fed and National Association of Home Builders readings, as well as slowing in both November‘s Industrial Production and Leading Indicators, and outright shrinkage for the month’s Retail Sales. Thus the Baro as it currently fails:

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

EUA Approved as a New Strain Surfaces in the UK


Following last Thursdays review by FDA advisors, the FDA issued Moderna Inc. with a EUA for distribution and use across the U.S.To get more news about WikiFX, you can visit wikifx official website.
The EUA allows the vaccination of 18-year-olds and older with Moderna Inc.s mRNA vaccine.

Late last week, the U.S government and the markets had anticipated the EUA approval. 20 million doses are due for the U.S before the end of the year.
As new COVID-19 cases continue to surge across the U.S, Operation Warp Speed will need to prove decisive in the fight against the pandemic.
[fx-article-ad]Whats next?
Following the FDA approval, Moderna Inc. expects to deliver doses of the vaccine to healthcare centers from Monday.
A reported 3,700 sites are to begin vaccinations at the start of the week. The number of doses is expected to be far higher than those that Pfizer Inc. is in the process of circulating.
This is assuming that there are no supply chain issues that could undermine the production of 20 million doses by year-end. Over the weekend, there were reports that certain states had seen their allocation of the Moderna Inc. vaccine cut significantly…
Over the weekend, Moderna Inc. began to deliver vaccine doses under guard and in secure refrigeration.
Later today, the CDC is also set to decide on the next priority group beyond phase 1c to receive the COVID-19 vaccine.
The CDCs phase sequence for the highest priority recipients of COVID-19 vaccines was as follows:
Phase 1a: Healthcare personnel and long-term care facility residents.
Phase 1b: Essential workers including the education sector, food & agriculture, utilities, police, firefighters, correction officers, transportation.
Phase 1c: Adults with high-risk medical conditions and adults of the age of 65 years plus.
In terms of numbers, healthcare personnel and long-term care facility residents total around 24 million. This would require a total of 48 million doses for phase 1a alone.
This means that, while the CDC will decide on priority groups beyond phase 1c, new groups will need to wait well into the New Year based on vaccine delivery numbers.

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

Congress Faces Shutdown Deadline as Lawmakers Scramble to Secure COVID Relief Deal


CNBC is reporting late Sunday afternoon some good news. The long-awaited stimulus deal could be in reach after months of failed negotiations, and Modernas vaccine started shipping today to sites across the nation. Both events could have an impact on the Asian and European markets early Monday, and U.S. futures during the pre-market session.To get more news about WikiFX, you can visit wikifx official website.
In the cash market on Friday, all three major U.S. stock indexes finished in the red. The benchmark S&P 500 Index settled at 3709.41, down 13.07 or -0.39%. The blue chip Dow Jones Industrial Average finished at 30179.05, down 124.32 or -0.45% and the tech-weighted NASDAQ Composite closed at 12755.64, down 9.11 or -0.08%.

McConnell Expects to Have Final Stimulus Agreement Nailed Dow in Hours
Congress reached a compromise in a last-minute battle over the Feds emergency lending powers, with votes in the House and Senate on a stimulus deal possible sometime today, CNBC reported.
Though an agreement is in reach, lawmakers do not have one in hand yet, and its possible that disagreements could arise again today and delay talks – which has happened repeatedly in the past.
Lawmakers are tying stimulus talks to broader government funding legislation. They face a deadline of 12:01 a.m. ET Monday to avert a government shutdown.
[fx-article-ad]House Expects to Vote on COVID Relief, Government Funding
The House expects to vote on a coronavirus relief and government funding package later today, according to Majority Leader Steny Hoyers office.
Congressional leaders are working through the final details of an expected $900 billion pandemic aid proposal and could announce a deal in the coming hours.
A compromise over a Republican-backed provision to limit the Federal Reserves emergency lending powers, which held up a deal at the last minute, cleared the way for Congress to move toward an agreement.
Lawmakers have to move quickly to both release legislation and push it through both chambers of Congress.
If Republicans and Democrats reach a deal, the House would move to approve it first, followed by the Senate. Any one senator can hold up swift passage of legislation.
More delays in putting together a bill may require Congress to approve another short-term measure to keep the government open.
Short-Term Impact
On paper, the passage of a bill to provide new fiscal stimulus should be a market moving event with gains likely in stocks and gold because of the new liquidity hitting the market and a sell-off in the U.S. Dollar for the same reason.
However, the news has been telegraphed for weeks so we could see a spike in prices following the announcement then a return to more normal price activity shortly thereafter. Furthermore, there is risk that the news will become a “buy the rumor, sell the fact” situation. With stocks and gold moving higher initially then turning lower for the session. The dollar could actually rebound if stocks tumble after hitting a 2-1/2 year low last week.

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

ベストバイは、我々がアップル腕時計シリーズ5で見た最高の取引を主催しています、そして、貯金は全部のラインナップにわたって広がります。40 mmのGPS版は、その原価から100ドルである299ドルで最も手頃なシリーズ5時計です。特に、私たちがこのモデルの価格低下をカバーした最後の時間より安い50ドルです。ベストバイは現在、ストックでいくつかの色のオプションがありますが、それは日が運ぶように売却することがあります。標準的なcolorwaysに加えて、それは同じ価格のためにナイキスタイルの腕時計を売っています。To get more news about ウブロコピー, you can visit ikebukuro777 official website.

あなたが44 mmのバージョンにサイズアップグレードを望むならば、それは今日、329ドルであなたに30ドルのプレミアムを犠牲にするだけです。このサイズで同様に、ベストバイは1日を通して変わるかもしれませんが、利用できるいくつかのケースとストラップcolorwaysを持ちます。

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

当社の編集チームによって独立して選択された製品は、私たちは私たちのリンクから作られた購入から手数料を得ることがあります。小売業者はまた、会計目的のために特定の監査可能なデータを受け取ることがあります。To get more news about レプリカ時計, you can visit ikebukuro777 official website.

月に到着した新しいアップル時計について渦巻く渦巻きで、我々は現在のApple腕時計シリーズ5の若干のかなりの割引を見始めています。

たった今、アマゾンはちょうど299ドルのためにスペースグレイ、ピンクまたは銀でアップル腕時計シリーズ5を持ちます。それは、399ドルのそのレギュラー価格から100ドルです。アップルは決してその製品を売りに出さないので、Amazonは値引きをする最高の場所の一つです。

この取引はあなたに100ドルのアップル腕時計をあなたに100ドルのアップル腕時計(それは以前のモデルより30 %大きいタッチスクリーンを持っています)をプラスして、「常に」網膜ディスプレイ、多くの改善されたGPS、ステップ、カロリー、心拍数と心臓リズム(ECGまたは「心電図」アプリを通して)を含むフィットネス・トラッキングのような更新された特徴を持ちます。

シリーズ5は、そのトラッキング機能のためだけでなく、アウトのために素晴らしいですが、それはまた、50メートルまで耐水性であるため、あなたが心配せずにプールや海にそれを取ることができるという意味です。

すべてのAppleの時計と同様に、この1つを呼び出すには、テキストを使用して音楽を聴くことができます。また、あなたの好きなアプリを追加するスペースのトンです。そして、あなたは現金を取るか、クレジットカードマシン(特にこれらの敏感な時間の間に大きい)を取り出すことなく購入をするために、アップル賃金を使うことができます。

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

彼のセックス人形をとったボディービルダーは、彼女がクリスマスの直前に悲劇的に壊れていると明らかにしました。To get more news about リアルドール, you can visit jpdolls official website.

彼は結婚した最初のクリスマスの計画を破ったと言いますカップルユリTolochkoは、カザフスタンから、今緊張した日のための時間内に彼女のビットのすべてが良い作業順序に戻って修復することができるかどうかを見て緊張して直面している。

彼は、彼女の無事の復帰が彼らの「贈り物」であると言いましたスターユリ結婚式は11月のゲスト数十人で行われた。

彼は最初にナイトクラブで彼女に会いました、そして、コロナウイルスのパンデミックが世界を投げ込む前に、このペアは今年3月に結婚することになっていました混乱彼が10月31日にアルマトイのカザフ市でトランスジェンダーの集会の間、攻撃されたあと、式典は2回遅れました。結婚式の後、私は彼女をより少ない人々に見せることに決めました。多分私は利己的すぎる。

「でもそれはマルゴの美しさで、私は彼女にこうすることができ、彼女は気にしないだろう」

クリスマスの日-カザフスタンの1月7日-彼はマルゴーと自宅に滞在し、“ステーキと寿司”または“友人といくつかの楽しい”を注文する可能性があると述べた。

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

Dedicated high speed board materials such as Thermoset Hydrocarbon and PTFE laminates, will have better and more reliable properties in higher frequency designs than FR-4. There some trade-offs, which we will discuss shortly, but first let’s look at some of the advantages that high speed board design materials offer:To get more news about fr4 board, you can visit pcbmake official website.

Decreased Signal Loss. As transmission line frequencies increase, signal loss becomes more of a problem. High speed design board materials have a much lower dissipation factor than FR-4, with some of the materials, such as the nearly pure PTFE laminates, being an order of magnitude better. These lower dissipation factors have are a huge factor in reducing signal loss.

More Tightly Controlled Impedance. Traditional PCB materials such as FR-4 do not offer as precise control over dielectric constants (Dk) as high speed board materials do. FR-4 Dk’s can vary +/- 10% or more while materials such as PTFE hold their Dk tolerance at +/- 2% or better.

Better Thermal Management. Some high speed design board materials such as Thermoset Hydrocarbon laminates have much better thermal conductivity than FR-4. If your design is going to dealing with thermal management issues, then these board materials are the ones to investigate.

Increased Moisture Absorption. Water has dielectric properties and even a small amount of moisture absorbed into a PCB with high frequency circuits can change the electrical performance of those circuits. While FR-4 can have a moisture absorption rating of nearly 50%, some of the PTFE materials are as low as 2% and should be considered to resolve this problem.

Robust Dimensional Stability. For a dense high speed design with tight tolerances, the need for dimensional stability increases. While FR-4 is known for its dimensional stability, it lacks the other advantages that the high speed materials offer. In this case, the Thermoset Hydrocarbon laminates might be a better choice.

There is a cost to all the advantages of high speed board materials, and the first one to consider is the actual cost. These materials are expensive, and that needs to be factored into your decision. Another issue to consider is that some of these materials are more difficult to work with during fabrication and assembly than the others. The nearly pure PTFE laminates for example, which offer tremendous electrical performance, require fabrication processes which are not standard.

There are many different high speed board materials to consider, and each of them has their strengths and weaknesses. Part of your decision process will be to weigh the pros and cons of each material. Some may give a better electrical performance while at the same time be more difficult to fabricate. Another may be a better choice to fabricate with, but you may lose some of the thermal advantages of the first choice.

High speed PCB designs require careful selection of board materials for their construction, and FR-4 may not be the best choice. Although FR-4 is being updated to work better in high speed applications, there are many other options to chose from. These guidelines should help you as you consider which materials are best for your design.

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

The unified environment in Altium Designer also includes layout and routing features for creating high speed PCBs, HDI circuit boards, and rigid-flex PCBs. Every function in Altium Designer is built on a rules-driven design engine, and all your PCb layout and routing tools are accessible within a single program. The simulation features in Altium Designer are also ideal for examining signal integrity in high speed and HDI circuit boards.To get more news about BT PCB, you can visit pcbmake official website.

The design rules-driven engine in Altium Designer automatically flags errors as you create schematic drawings and your PCB layout. You can stay productive and design powerful electronics in this unique design environment.
Learn more about Altium Designer’s unified rules-driven design environment.
To help ensure signal integrity in materials for HDI and high speed circuit boards, Altium Designer includes an integrated 3D field solver for impedance and signal integrity calculations.
Learn more about Simberian’s 3D field solver in Altium Designer.
If you’re new to integrated PCB design, Altium gives you access to PCB design tutorials and resources through Altium Academy.
Learn more about PCB design in Altium Designer through Altium Academy.Materials for high speed and HDI circuit boards is a serious subject for PCB designers and electrical engineers. Several resources exist that provide a comparison of PCB materials, but you need design software that lets you use any material for PCB stackup design. The PCB design features in Altium Designer let you select materials for your advanced PCB stackup, and you’ll have access to a full suite of CAD features and simulation tools.

Altium Designer on Altium 365 delivers an unprecedented amount of integration to the electronics industry until now relegated to the world of software de

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

As we know, there are all kinds of ceramic PCB, DPC ceramic PCB, DBC ceramic PCB, LTCC ceramic PCB, HTCC ceramic PCB, thick film/thin film ceramic PCB.To get more news about BT PCB, you can visit pcbmake official website.

Very few people know that there is AMB (Active Metal Bonding) ceramic PCB.

Do you know what’s the advantage for AMB ceramic PCB compare with other ceramic PCB (Al2O3/AlN/BeO/Si3N4 PCB)?

For AMB PCB, the substrate can be AlN ( Aluminium Nitride) and Si3N4 (Silicon Nitride) normally, AlN is the most popular. It is widely known that AlN with very high thermal conductivity ( Theoretical Value is 320W/m.k).

Using AMB technology to combine the oxygen-free copper and AlN material under high temperature, AlN with smaller thermal resistance, lower coefficient of thermal expansion and more stable partial discharge capability.

Compared with the traditional DBC or other substrate, the Aluminum Nitride copper-clad ceramic substrate made by the AMB technology with higher bonding strength of the copper layer and better cold and hot cycling characteristics.

So it is widely used in the field of IGBT, especially for the high-power de

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

For the 12 layer complex Blind& Buried Micro-Vias rigid PCB boards with Micro-Vias in L1-L2 、 L2-L3、L3-L4、L4-L9、L9-L10、L10-L11、L11-L12、L1-L12, we use ISOLA 370HR material in the rigid board to ensure the lamination process. In this way, the stability of quality is easily guaranteed.To get more news about Isola 370HR PCB, you can visit pcbmake official website.
* Fine line:2.5/2.5mil line width
Hot Tags: isola 370hr material pcb stacking, China, manufacturers, suppliers, factory, company, price, cheap, cost, buried via HDI Pcb Prototyping, Industrial Flex Board, PCB maker, Advanced PCB Board Printed Circuits, Advanced PCB with immersion gold, Rigid PCB Design

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

received a 2020 Mexico Technology Awardin the category of Solder – Bar & Wire for its PF606-F13 lead-free and halogen-free solder wire.The award was announced during a Virtual Awards Ceremony on Monday, October 26, 2020.To get more news about Halogen Free PCB, you can visit pcbmake official website.

PF606-F13 is suitable for a variety of automatic soldering applications, including: TPC soldering, buzzer, bending element, LCD panel, embedded element, solder joints, wire soldering, button, screen connector and FPC soldering. The solder wire reduces the technical requirements of manual operation and enables mass production.

The Mexico Technology Awards acknowledge the latest innovations available in Mexico produced by OEM manufacturing equipment and materials suppliers during the last 12 months.

SHENMAO is dedicated to the production of solder products including Water Soluble and No-clean Solder Paste, Laser Solder Paste, Solder Preforms, Cored Solder Wire, Wave Solder Bar Alloys, Wave Soldering Fluxes, Extremely Pure Solder Powder up to Type 8, BGA and Micro BGA Solder Sphere, Wafer Level Packaging Solder Paste and Fluxes, LED Die Attach Paste, High Performance Liquid Fluxes, Solder Preform, Solar Ribbon, Plating Anode used in PCB Fabrication, Assembly and Semiconductor Packaging Processes.

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

In recent months, the ability to hide components inside a circuit board has become an item of interest. We could trace this to the burgeoning badgelife movement, where engineers create beautiful works of electronic art. We can also attribute this interest to Bloomberg’s Big Hack, where Jordan Robertson and Michael Riley asserted Apple was the target of Chinese spying using components embedded inside a motherboard. The Big Hack story had legs, but so far no evidence of this hack’s existence has come to light, and the companies and governments involved have all issued denials that anything like this exists.To get more news about Cavity PCB, you can visit pcbmake official website.

That said, embedding components inside a PCB is an interesting topic of discussion, and thanks to the dropping prices of PCB fabrication (this entire project cost $15 for the circuit boards), it’s now possible for hobbyists to experiment with the technique.

But first, it’s important to define what ‘stuffing components inside a piece of fiberglass’ is actually called. My research keeps coming back to the term ’embedded components’ which is utterly ungooglable, and a truly terrible name because ’embedded’ means something else entirely. You cannot call a PCB fabrication technique ’embedded components’ and expect people to find it on the Internet. For lack of a better term, I’m calling this ‘Oreo construction’, because of my predilection towards ‘stuf’, and because it needs to be called something. We’re all calling it ‘Oreo construction’ now, because the stuf is in the middle. This is how you do it with standard PCB design tools and cheap Chinese board houses.
The immediate inspiration for this build comes from designer2k2 and a flat-pack Christmas ornament. This project used castellated pins and a series of holes to mount SMD parts to the side of a PCB instead of the top or bottom. While soldering electronic components to the side of a PCB is somewhat novel, mounting electronic components to the side of a PCB is nothing new. Lumen Electronic Jewelry is producing a PCB ‘heart’ pin (right) with a capacitor and USB port mounted inside a cutout in the milling layer of a PCB. Likewise, other PCB projects — mostly PCB business cards — have experimented with mounting other components in a cutout in the milling layer. I have seen coin cell battery holders that use PCB cutouts with two ‘tabs’ that capture a battery between fiberglass.
The idea of embedding components within a stack of fiberglass and copper is something we really haven’t seen before in the small-scale hobbyist world, but it can be done. Embedded components — there’s that ungooglable term again — can be done in very expensive products. The reasons for doing this range from saving physical space, better EMI shielding, and making something more difficult to reverse engineer. This is a technique for military and aerospace components, where price is no object.

Boards for military and aerospace work are one thing, but the past year saw a significant amount of discussion over embedded components, albeit for all the wrong reasons. Bloomberg’s Big Hack was a story about Supermicro motherboards shipped to Apple and Amazon that had additional components giving Chinese hackers a back door. This story was widely criticized, Apple and Amazon have fervently denied having found compromised motherboards, and any day now I’m expecting Supermicro to file suit in a libel case. This story did however generate a lot of discussion over how such a hack could happen. The top minds of the Twitterverse believe this could be done by embedding a small microcontroller inside the motherboard’s PCB, between the baseboard management controller and its Flash memory. This small microcontroller stuck between a few layers of PCB could in theory change a few bits of the BMC’s Flash to give attackers a back door, and Trammel Hudson gave an interesting talk at CCC discussing the theory of this fictional hack’s operation. It’s within the realm of possibility, but the smart money says this didn’t happen with Supermicro motherboards shipped to Amazon or Google. In any event, x-ray inspection or even a flying probe test would reveal any ’embedded component’ was in the PCB.

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar

OMEGA PCB connector installation is now easier for high-volume production printed circuit boards. PCC-SMD Thermocouple, RTD and thermistor PCB connectors now come in convenient 13” diameter Tape and Reel packaging, which can be easily integrated into automated pick and placement processes.To get more news about Cavity PCB, you can visit pcbmake official website.

The OMEGA PCC-SMD PCB connector is perfect for bringing Thermocouple, RTD, and Thermistor probes to high-volume production printed circuit boards. Take advantage of their PCB Connector’s cold junction compensation features and use it with an Analog to Digital Converter (ADC). These SMT populated connectors have a superior Mechanical design that thermally couples them to the circuit board for ideal cold-junction compensation. They can be used with any Thermocouple Calibration Type and are designed for low-cost, high-volume production and feature a patent-pending asymmetric design that prevents connectors from being plugged in backward.
For testing purposes, we are offering a free line of 20 PCB connectors. To qualify for this offer, just complete this quick questionnaire to receive our free coupon code.

OMEGA™ is an established global leader in the technical marketplace, offering more than 100,000 state-of-the-art products for measurement and control of temperature, humidity, pressure, strain, force, flow, level, pH and conductivity. OMEGA also provides customers with a complete line of data acquisition, electric heating and custom engineered products.

Blinklist!Blogmarks!BlinkBits!Ask!
  • 0 Komentar